
Add to Cart
Passenger and Material Hoist 2tons Medium Speed VFD TUV Approved KP-B07
Features and Advantages
* Modular and standardizing system makes the Kangbo construction elevators be flexible, efficient.
* The material hoist runs without vibration or trembling, and starts and stops without surging or jerking.
* The passenger and elevator is reliable with very little breakdown and is durable with very long work-life.
* Adopt energy-saving helical reducers which are extremely strong, reliable and durable.
* The integrated elevator car roof, with edges fully welded one time to complete, enhance hoist cage strength and ensure no water leakage.
* The elevators are equipped with full set of safety facilities, including centrifugal brake, limit switches, Electromechanical interlocks.
* Frequency control unit (FC), with closed-loop, which gives the passenger and material hoists very smooth starting and stopping with low starting current and less wear and tear.
* KANGBO passenger and material hoists apply non-eccentric rollers, make the installation of hoists be faster and easier, with much less error. The users don't need to send the skillful technicians to adjust the rollers position again and again after installation.
* The structure steel of the cages and drive devices are thicken and enlarge to ensure the strength and worklife.
* The structure of drive device and cage is made of Q345B steel, the width of KANGBO cage's main steel channel is 160mm, other brand is 120mm only.
Technical Data
Item & Article No. | SC200BZ, KP-B07 |
Payload Capacity | 2000 kg |
Lifting Speed | 0–46 m/min. |
Max. Lifting Height | 450 m |
Cage Width (internal) | 1.5 m |
Cage Length (internal) | 3.2 m |
Cage Height (internal) | 2.35 m |
Motor Control | Frequency Control |
Engine Power | 2x15 kw |
Gearbox | Helical Gearbox of KANGBO Make |
Safety Device | Centrifugal Brake SAJ40 |
Power Supply Range | 380–500 V, 50 or 60 Hz, 3 phase |
Mast Section | Square column 650*650*1508 mm with bolted rack |
Rack Module | 8 |