
Add to Cart
High Safety Vertical Transportation Construction Site Lift
Construction Site Lift Description
* If you have special requirement on power, please state it when order the consignment.
* We can produce the cage and lengthen the tie-in according to the size the customer requested.
* We can heighten the erection height according to the customer’s request.
Construction Site Lift Configuration
There is a electrical small crane available to facilitate the assembly of columns and doors on the floors.
Available in single or twin hoist cage configuration.
The construction rack and pinion elevators are Variable Frequency Drive (VFD), with low starting current and much less wear and tear, very smooth starting and stopping.
Manual or Automatic Controls of the hoist is optional.
Lighting inside construction elevator car is LED ceiling lamp.
Certificate
TUV proved according to European Regulation EN 12159:2012, EN 60204-1:2006/A1:2009.
Construction Site Lift Technical Data
Item & Article No. | SC300BG, KP-B15; SC300/300BG, KP-B16 Construction Site Lift |
Payload capacity | 3,000 kg |
Lifting speed | 0–60 m/min. |
Max. lifting height | 250/400 m* |
Cage Size (internal) | 3.2(Length)*1.5((Width)*2.35(Height) meter |
Motor control | FC control |
Engine power | 3x23 kw |
Gearbox | Helical reducer |
Safety device type | centrifugal brake |
Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
Type of mast | Square column 650*650 mm with bolted rack |
Length mast section | 1.508 m |
Rack module | 8 |