Construction Hoist SC200/200 FIC-12 Fully Intelligent Control passenger and material Rack and Pinion Lift
Features
* Apply high efficiency and energy-saving gear reducer
*Apply non-eccentric rollers. No need to adjust rollers after installation. That means faster installs for any Exterior
Restoration or Construction project and no mistakes caused by installation.
*Integrated cage roof. Cage roof is made by a full plate of tread plate cut by Laser and welded by robots one time to
complete, with high strength and no leakage.
* Unique flap door for loading/unloading ramp
* Additional 'C' door at cage side for convenient loading/unloading.
* Interlocked roof hatch
* Drop test facility with remote pendant
* Be equipped with with Fully Intelligent System, with functions including floor selection, floor calling and automatic cage landing/stop, automatic open/close cage doors and floor doors, fault detect, display and alarm, personnel biologic recognition and permissions, etc.
* Easy access to electrical panels for maintenance
* centrifugal braking safety device
* Heavy duty galvanized mast sections
Technical Data
Item & Article No. |
SC200/200 FIC-12 |
Number of Cages |
2 Cages |
Payload Capacity |
2,000 KG each Cage |
Lifting Speed |
0–60 meter/minute, fully loaded |
Max. Lifting Height |
250 m / 450 m * |
Cage Size (internal) |
3.2(Length)*1.5(Width)*2.35(Height) Meter per Cage |
Cage Doors |
Modularized Entrance Door and Discharge Door, and Third Door at the long side of cage |
Engine Power |
3*15 KW each Cage; 2*3*15 KW Totally. |
Motor Control |
Frequency Control (FC) |
Invertor Power (KW) |
1*55 KW each Cage; 2*55 KW Totally. |
Gearbox |
Helical Gearbox |
Safety Device Type |
Centrifugal Brake |
Power Supply Range |
380–500 V, 50 or 60 Hz, 3 Phase |
Mast Section |
Square Column 650*650*1508 mm with Bolted Rack |
Rack Module |
8 |
* Increased lifting height on request. 250 m with step-up transformer only. 400 m with step-up/step-down transformer. |